Skip to content

UV dosimeter for UV-C radiation disinfection – 100

Additional information
Brand

Chemdye

Process

UV-C Disinfection

Packaging

1 roll x 1000

Initial Color

Yellow

Final Color

Orange, Red

Indicator Type

Type 1 Chemical Indicator

Regulations

ISO 13485

Description

Self-adhesive labels printed with reactive ink to control disinfection processes by UV-C radiation up to 25 mj/cm2. DOSIMETER.

Instructions for use

1. Peel off Chemdye® ChemDose CD87-100 chemical indicator from the roll and stick it on the surface which level of disinfection is pretended to be controlled. Use as many indicators as surfaces intended to be verified.

NOTE 1: it is recommended to distribute Chemdye® ChemDose CD87-100 chemical indicators uniformly along the room to be disinfected, placing at least one per square meter. It is recommended to place Chemdye® ChemDose CD87-100 chemical indicators not higher than 2 m over the floor level.

2. Leave the room and run a normal disinfection cycle.

3. Once the process has finished, contrast the final color of each Chemdye® ChemDose CD87-100 chemical indicator used against the Results Reference Card provided and determine the accumulated radiation dose received. The attached Documentation Chart allows to quickly record and analyze the obtained results.

NOTE 2: exposed and non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be kept protected from light. Non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be removed from its original packaging ONLY right before running the disinfection process.

Instructions for use

1. Peel off Chemdye® ChemDose CD87-100 chemical indicator from the roll and stick it on the surface which level of disinfection is pretended to be controlled. Use as many indicators as surfaces intended to be verified.

NOTE 1: it is recommended to distribute Chemdye® ChemDose CD87-100 chemical indicators uniformly along the room to be disinfected, placing at least one per square meter. It is recommended to place Chemdye® ChemDose CD87-100 chemical indicators not higher than 2 m over the floor level.

2. Leave the room and run a normal disinfection cycle.

3. Once the process has finished, contrast the final color of each Chemdye® ChemDose CD87-100 chemical indicator used against the Results Reference Card provided and determine the accumulated radiation dose received. The attached Documentation Chart allows to quickly record and analyze the obtained results.

NOTE 2: exposed and non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be kept protected from light. Non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be removed from its original packaging ONLY right before running the disinfection process.

Description

Self-adhesive labels printed with reactive ink to control disinfection processes by UV-C radiation up to 25 mj/cm2. DOSIMETER.

Instructions for use

1. Peel off Chemdye® ChemDose CD87-100 chemical indicator from the roll and stick it on the surface which level of disinfection is pretended to be controlled. Use as many indicators as surfaces intended to be verified.

NOTE 1: it is recommended to distribute Chemdye® ChemDose CD87-100 chemical indicators uniformly along the room to be disinfected, placing at least one per square meter. It is recommended to place Chemdye® ChemDose CD87-100 chemical indicators not higher than 2 m over the floor level.

2. Leave the room and run a normal disinfection cycle.

3. Once the process has finished, contrast the final color of each Chemdye® ChemDose CD87-100 chemical indicator used against the Results Reference Card provided and determine the accumulated radiation dose received. The attached Documentation Chart allows to quickly record and analyze the obtained results.

NOTE 2: exposed and non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be kept protected from light. Non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be removed from its original packaging ONLY right before running the disinfection process.

Instructions for use

1. Peel off Chemdye® ChemDose CD87-100 chemical indicator from the roll and stick it on the surface which level of disinfection is pretended to be controlled. Use as many indicators as surfaces intended to be verified.

NOTE 1: it is recommended to distribute Chemdye® ChemDose CD87-100 chemical indicators uniformly along the room to be disinfected, placing at least one per square meter. It is recommended to place Chemdye® ChemDose CD87-100 chemical indicators not higher than 2 m over the floor level.

2. Leave the room and run a normal disinfection cycle.

3. Once the process has finished, contrast the final color of each Chemdye® ChemDose CD87-100 chemical indicator used against the Results Reference Card provided and determine the accumulated radiation dose received. The attached Documentation Chart allows to quickly record and analyze the obtained results.

NOTE 2: exposed and non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be kept protected from light. Non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be removed from its original packaging ONLY right before running the disinfection process.

FAQs

You can get commercial assistance contacting us here

You can find product resources and information, visiting our download center here or on our products page.

Our products can be obtained by talking with our commercial executives, that will guide through all your buying processes, giving our best effort for an easy and comforting purchasing experience. You can contact our team here.

To be a Terragene distributor, you can get in touch with our commercial executives filling our contact formulary here.
Category
Select some options
Category
Process
Select some options
Process
Indicator Types
Indicator Types
Brand
Select some options
Brand
Read-Out Time
Select some options
Read-Out Time