UV dosimeter for UV-C radiation disinfection – 100
Additional information
| Brand | Chemdye |
|---|---|
| Process | UV-C Disinfection |
| Packaging | 1 roll x 1000 |
| Initial Color | Yellow |
| Final Color | Orange, Red |
| Indicator Type | Type 1 Chemical Indicator |
| Regulations | ISO 13485 |
| Field of activity | Dental, Healthcare, Pharmaceutical |
Description
Self-adhesive labels printed with reactive ink to control disinfection processes by UV-C radiation up to 25 mj/cm2. DOSIMETER.
Instructions for use
1. Peel off Chemdye® ChemDose CD87-100 chemical indicator from the roll and stick it on the surface which level of disinfection is pretended to be controlled. Use as many indicators as surfaces intended to be verified.
NOTE 1: it is recommended to distribute Chemdye® ChemDose CD87-100 chemical indicators uniformly along the room to be disinfected, placing at least one per square meter. It is recommended to place Chemdye® ChemDose CD87-100 chemical indicators not higher than 2 m over the floor level.
2. Leave the room and run a normal disinfection cycle.
3. Once the process has finished, contrast the final color of each Chemdye® ChemDose CD87-100 chemical indicator used against the Results Reference Card provided and determine the accumulated radiation dose received. The attached Documentation Chart allows to quickly record and analyze the obtained results.
NOTE 2: exposed and non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be kept protected from light. Non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be removed from its original packaging ONLY right before running the disinfection process.
Instructions for use
1. Peel off Chemdye® ChemDose CD87-100 chemical indicator from the roll and stick it on the surface which level of disinfection is pretended to be controlled. Use as many indicators as surfaces intended to be verified.
NOTE 1: it is recommended to distribute Chemdye® ChemDose CD87-100 chemical indicators uniformly along the room to be disinfected, placing at least one per square meter. It is recommended to place Chemdye® ChemDose CD87-100 chemical indicators not higher than 2 m over the floor level.
2. Leave the room and run a normal disinfection cycle.
3. Once the process has finished, contrast the final color of each Chemdye® ChemDose CD87-100 chemical indicator used against the Results Reference Card provided and determine the accumulated radiation dose received. The attached Documentation Chart allows to quickly record and analyze the obtained results.
NOTE 2: exposed and non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be kept protected from light. Non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be removed from its original packaging ONLY right before running the disinfection process.
Description
Self-adhesive labels printed with reactive ink to control disinfection processes by UV-C radiation up to 25 mj/cm2. DOSIMETER.
Instructions for use
1. Peel off Chemdye® ChemDose CD87-100 chemical indicator from the roll and stick it on the surface which level of disinfection is pretended to be controlled. Use as many indicators as surfaces intended to be verified.
NOTE 1: it is recommended to distribute Chemdye® ChemDose CD87-100 chemical indicators uniformly along the room to be disinfected, placing at least one per square meter. It is recommended to place Chemdye® ChemDose CD87-100 chemical indicators not higher than 2 m over the floor level.
2. Leave the room and run a normal disinfection cycle.
3. Once the process has finished, contrast the final color of each Chemdye® ChemDose CD87-100 chemical indicator used against the Results Reference Card provided and determine the accumulated radiation dose received. The attached Documentation Chart allows to quickly record and analyze the obtained results.
NOTE 2: exposed and non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be kept protected from light. Non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be removed from its original packaging ONLY right before running the disinfection process.
Instructions for use
1. Peel off Chemdye® ChemDose CD87-100 chemical indicator from the roll and stick it on the surface which level of disinfection is pretended to be controlled. Use as many indicators as surfaces intended to be verified.
NOTE 1: it is recommended to distribute Chemdye® ChemDose CD87-100 chemical indicators uniformly along the room to be disinfected, placing at least one per square meter. It is recommended to place Chemdye® ChemDose CD87-100 chemical indicators not higher than 2 m over the floor level.
2. Leave the room and run a normal disinfection cycle.
3. Once the process has finished, contrast the final color of each Chemdye® ChemDose CD87-100 chemical indicator used against the Results Reference Card provided and determine the accumulated radiation dose received. The attached Documentation Chart allows to quickly record and analyze the obtained results.
NOTE 2: exposed and non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be kept protected from light. Non-exposed Chemdye® ChemDose CD87-100 chemical indicators must be removed from its original packaging ONLY right before running the disinfection process.
More Products
PRO1 ENDO
