fbpx Skip to content

Start Up Kit- Steam

SKU: SKST Category: Tag:
Brand

Terragene

Process

Steam

Description

SKST / Set of Chemical Indicators + Biological Indicators + MiniBio Auto-Reader Incubator.

Bionova® MiniBio Auto-Reader Incubator

3 metal positions (38 mm deep, 9 mm diameter) to incubate

Rapid/Super Rapid/Ultra Rapid Fluorescence Readout Self-contained biological indicators.

1 ampoule crusher.

Special hole for external thermometer.

Incorporated top cap.

Dual Temperature System: Allows selecting between two different incubation temperatures (37 °C and 60 °C).

USB connection for registering results in a PC through Reading and Traceability Software.

Allows incubation of 3 indicators simultaneously, in different incubation times, at the same temperature.

Thermal Printer to record results.

Sound alarm for event indication.

Detection and automatic cancellation of the fluorescence reading of the biological indicator.

Fluorescence reading wavelength: ~ 460 nm.

Firmware update by the user.

Dimensions: 180 mm high, 154 mm wide and 105 mm deep. Voltage range: 100 €“ 240 V AC.

BT20

105 or 106 Geobacillus stearothermophilus ATCC 7953 spores per vial. Positive growth results (failure in the sterilization process): culture medium turns to yellow, incubation at 60 ºC for 24 hours (maximum).

BT220

Rapid Readout Fluorescence System.

Final fluorescence reading is performed after 3-hour incubation at 60 ºC.

BT222

Super Rapid Readout Fluorescence System.

Final fluorescence reading is performed after 1-hour incubation at 60 ºC.

BT224

Ultra Rapid Readout Fluorescence System.

Final fluorescence reading is performed after 20-minute incubation at 60 ºC. 106 Geobacillus stearothermophilus ATCC 7953 spores per vial.

An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 60 ºC, thus showing the presence of living spores.

If sterilization process was successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed. Fluorescence results may be compared to the 7-day visual reading.

NOTE: If 7-day readout is performed, a humidified environment will be

required to avoid medium to dry out. D-Value: Not lower than 1.5 minutes at 121 ºC. Another D-value is informed at 132°C and/or 135ºC. Z-Value: Not lower than 6 ºC.

Cintape®

CT22

Type 1 Chemical Indicator.

Roll of Super Adherent self-adhesive tape printed with indicator ink.

Size: 50 m x 19 mm.

Initial color: yellow

Final color: dark brown/black

Tape surface treated with covering materials that allow an easy and continuous writing. Super adhesive capable of adhering to wrap cloth paper and plastic. Designed with advanced technologies to ensure that the tape remains strongly adhered to the surface after sterilization and leaves no trace of adhesive on the surface of the materials after removal.

Chemdye®

CD29

Type 4 Multi-variable Chemical Indicator.

One-side laminated punched double card strips printed with indicator ink.

Size: 200 x 15 mm.

Initial color: yellow.

Final color: black.

100 % Toxic Heavy Metals free.

Integron®

IT26-C

Type 5 Integrator Indicator.

Integrator Indicator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met.

The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of a 106 Geobacillus stearothermophilus spores population, calculated in BIER (Biological Indicator Evaluator Resistometer).

Size: 52 mm x 21 mm.

Conditions: saturated steam at 121 ºC, 128 ºC, 135 ºC.

Integron®

IT26-1YS

Type 5 Integrator Indicator.

One-side-laminated strips printed with indicator ink.

Size: 72 mm x 23 mm.

Initial color: yellow

Final color: black

100 % Toxic Heavy Metals free.

Integration condition calibrated with the kill time of a 106 Geobacillus stearothermophilus spores population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 ºC, 128 ºC, 135 ºC.

The product ensures an adequate control of the efficacy of sterilization processes (temperature, time, quality of steam).

Integron® IT27-3YS

Type 6 Emulator Indicator.

One-side-laminated strips printed with indicator ink.

Size: 72 mm x 23 mm.

Initial color: yellow

Final color: black

100 % Toxic Heavy Metals free.

The product ensures an adequate control of the efficacy of sterilization processes (temperature, time, quality of steam).

Chemdye® BD125X/2

Type 2 Chemical Indicator

Initial Color: yellow

Final Color: dark brown/black (should change homogeneously in the whole sheet)

Size: 16 mm x 125 mm x 125 mm

Assembly: 19 permeable barriers – 1 Glassine paper – 1 B&D Test Sheet – 19 permeable barriers. Wrapped with crepe paper.

Permeable barriers: 200 g/m2.

B&D Test Sheet: 240 g/m2.

100 % Lead Free.

Air removal or steam quality problems will be shown as heterogeneous color change into dark brown/black on the test sheet, such as lighter areas in the center or a non-uniform color change.

Description

SKST / Set of Chemical Indicators + Biological Indicators + MiniBio Auto-Reader Incubator.

Bionova® MiniBio Auto-Reader Incubator

3 metal positions (38 mm deep, 9 mm diameter) to incubate

Rapid/Super Rapid/Ultra Rapid Fluorescence Readout Self-contained biological indicators.

1 ampoule crusher.

Special hole for external thermometer.

Incorporated top cap.

Dual Temperature System: Allows selecting between two different incubation temperatures (37 °C and 60 °C).

USB connection for registering results in a PC through Reading and Traceability Software.

Allows incubation of 3 indicators simultaneously, in different incubation times, at the same temperature.

Thermal Printer to record results.

Sound alarm for event indication.

Detection and automatic cancellation of the fluorescence reading of the biological indicator.

Fluorescence reading wavelength: ~ 460 nm.

Firmware update by the user.

Dimensions: 180 mm high, 154 mm wide and 105 mm deep. Voltage range: 100 €“ 240 V AC.

BT20

105 or 106 Geobacillus stearothermophilus ATCC 7953 spores per vial. Positive growth results (failure in the sterilization process): culture medium turns to yellow, incubation at 60 ºC for 24 hours (maximum).

BT220

Rapid Readout Fluorescence System.

Final fluorescence reading is performed after 3-hour incubation at 60 ºC.

BT222

Super Rapid Readout Fluorescence System.

Final fluorescence reading is performed after 1-hour incubation at 60 ºC.

BT224

Ultra Rapid Readout Fluorescence System.

Final fluorescence reading is performed after 20-minute incubation at 60 ºC. 106 Geobacillus stearothermophilus ATCC 7953 spores per vial.

An optional visual pH color change confirmation could be made after 48 hours of incubation. If sterilization process has not been successful, culture medium will change to a greenish color first, and then to yellow during incubation at 60 ºC, thus showing the presence of living spores.

If sterilization process was successful culture medium will remain purple after the incubation process. 7-day readout is optional and not intended to be routinely performed. Fluorescence results may be compared to the 7-day visual reading.

NOTE: If 7-day readout is performed, a humidified environment will be

required to avoid medium to dry out. D-Value: Not lower than 1.5 minutes at 121 ºC. Another D-value is informed at 132°C and/or 135ºC. Z-Value: Not lower than 6 ºC.

Cintape®

CT22

Type 1 Chemical Indicator.

Roll of Super Adherent self-adhesive tape printed with indicator ink.

Size: 50 m x 19 mm.

Initial color: yellow

Final color: dark brown/black

Tape surface treated with covering materials that allow an easy and continuous writing. Super adhesive capable of adhering to wrap cloth paper and plastic. Designed with advanced technologies to ensure that the tape remains strongly adhered to the surface after sterilization and leaves no trace of adhesive on the surface of the materials after removal.

Chemdye®

CD29

Type 4 Multi-variable Chemical Indicator.

One-side laminated punched double card strips printed with indicator ink.

Size: 200 x 15 mm.

Initial color: yellow.

Final color: black.

100 % Toxic Heavy Metals free.

Integron®

IT26-C

Type 5 Integrator Indicator.

Integrator Indicator consists of a paper wick and a steam and temperature sensitive chemical pellet contained in a paper/film/foil laminate. The chemical pellet melts and migrates as a dark bar along the paper wick. The migration is visible through a zone marked ACCEPT or REJECT, thus indicating whether sterilization conditions were met.

The extent of migration depends on steam quality, time, and temperature. The ACCEPT result is reached when a theoretical spore population reaches its kill time, indicating integration condition has been reached. This condition is calibrated with the kill time of a 106 Geobacillus stearothermophilus spores population, calculated in BIER (Biological Indicator Evaluator Resistometer).

Size: 52 mm x 21 mm.

Conditions: saturated steam at 121 ºC, 128 ºC, 135 ºC.

Integron®

IT26-1YS

Type 5 Integrator Indicator.

One-side-laminated strips printed with indicator ink.

Size: 72 mm x 23 mm.

Initial color: yellow

Final color: black

100 % Toxic Heavy Metals free.

Integration condition calibrated with the kill time of a 106 Geobacillus stearothermophilus spores population, calculated in BIER (Biological Indicator Evaluator Resistometer). Conditions: saturated steam at 121 ºC, 128 ºC, 135 ºC.

The product ensures an adequate control of the efficacy of sterilization processes (temperature, time, quality of steam).

Integron® IT27-3YS

Type 6 Emulator Indicator.

One-side-laminated strips printed with indicator ink.

Size: 72 mm x 23 mm.

Initial color: yellow

Final color: black

100 % Toxic Heavy Metals free.

The product ensures an adequate control of the efficacy of sterilization processes (temperature, time, quality of steam).

Chemdye® BD125X/2

Type 2 Chemical Indicator

Initial Color: yellow

Final Color: dark brown/black (should change homogeneously in the whole sheet)

Size: 16 mm x 125 mm x 125 mm

Assembly: 19 permeable barriers – 1 Glassine paper – 1 B&D Test Sheet – 19 permeable barriers. Wrapped with crepe paper.

Permeable barriers: 200 g/m2.

B&D Test Sheet: 240 g/m2.

100 % Lead Free.

Air removal or steam quality problems will be shown as heterogeneous color change into dark brown/black on the test sheet, such as lighter areas in the center or a non-uniform color change.

FAQs

You can get commercial assistance contacting us here

You can find product resources and information, visiting our download center here or on our products page.

Our products can be obtained by talking with our commercial executives, that will guide through all your buying processes, giving our best effort for an easy and comforting purchasing experience. You can contact our team here.

To be a Terragene distributor, you can get in touch with our commercial executives filling our contact formulary here.