
Start Up Kit – Hydrogen Peroxide
Additional information
Brand | Terragene |
---|---|
Process | Hydrogen Peroxide |
Description
SKHP / Set of Chemical Indicators + Biological Indicators + MiniBio Auto-Reader Incubator.
Bionova® MiniBio Auto-Reader Incubator
3 metal positions (38 mm deep, 9 mm diameter) to incubate
Rapid/Super Rapid/Ultra Rapid Fluorescence Readout Self-contained biological indicators.
1 ampoule crusher.
Special hole for external thermometer.
Incorporated top cap.
Dual Temperature System: Allows selecting between two different incubation temperatures (37 °C and 60 °C).
USB connection for registering results in a PC through Reading and Traceability Software.
Allows incubation of 3 indicators simultaneously, in different incubation times, at the same temperature.
Thermal Printer to record results.
Sound alarm for event indication.
Detection and automatic cancellation of the fluorescence reading of the biological indicator.
Fluorescence reading wavelength: ~ 460 nm.
Firmware update by the user.
Dimensions: 180 mm high, 154 mm wide and 105 mm deep. Voltage range: 100 €“ 240 V AC.
BT91
105 or 106 Geobacillus stearothermophilus ATCC 7953 spores per vial. Positive growth results (failure in the sterilization process): culture medium turns to yellow, incubation at 60 ºC for 24 hours (maximum).
BT95
Rapid Readout Fluorescence System.
Final fluorescence reading is performed after 2-hour incubation at 60 ºC.
BT96
Super Rapid Readout Fluorescence System.
Final fluorescence reading is performed after 30-minute incubation at 60 ºC. 106 Geobacillus stearothermophilus ATCC 7953 spores per vial. An optional visual pH color change confirmation could be performed after 48 hours of incubation.
If sterilization process has not been successful, culture medium will change to yellow during incubation at 60 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain purple after the incubation process.
7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 30-minute reading. Fluorescence results may be compared to the 7-day visual reading.
NOTE: If 7-day readout is performed, a humidified environment will be required to prevent medium from drying out. D-Value at 2 mg/l H2O2, 50 ºC.
Cintape® CT40
Type 1 Chemical Indicator.
Roll of self-adhesive tape printed with indicator ink.
Size: 50 m x 19 mm.
Initial color: purple
Final color: green
100 % Toxic Heavy Metals free.
Tape surface treated with covering materials that allow an easy and continuous writing. Adhesive capable of adhering to wrap cloth, paper and plastic. Designed with advanced technologies to ensure that the tape remains adhered to the surface after sterilization and leaves no trace of adhesive on the surface of the materials after removal.
Chemdye® CD40
Type 4 Chemical Indicator.
Strips printed with indicator ink.
Size: 105 x 18 mm
Initial color: Púrple
Final color: Green
100 % Toxic Heavy Metals free
Chemdye® CD42
Type 1 Chemical Indicator.
Varnished strips printed with indicator ink.
Size: 105 x 18 mm
Initial color: Red
Final color: Yellow
100 % Toxic Heavy Metals free.
Chemdye® CD47
Type 1 Chemical Indicator.
Self-adhesive label (dot) printed with indicator ink.
Size: 15 mm of diameter
Initial color: purple
Final color: green
100 % Toxic Heavy Metals free.
Description
SKHP / Set of Chemical Indicators + Biological Indicators + MiniBio Auto-Reader Incubator.
Bionova® MiniBio Auto-Reader Incubator
3 metal positions (38 mm deep, 9 mm diameter) to incubate
Rapid/Super Rapid/Ultra Rapid Fluorescence Readout Self-contained biological indicators.
1 ampoule crusher.
Special hole for external thermometer.
Incorporated top cap.
Dual Temperature System: Allows selecting between two different incubation temperatures (37 °C and 60 °C).
USB connection for registering results in a PC through Reading and Traceability Software.
Allows incubation of 3 indicators simultaneously, in different incubation times, at the same temperature.
Thermal Printer to record results.
Sound alarm for event indication.
Detection and automatic cancellation of the fluorescence reading of the biological indicator.
Fluorescence reading wavelength: ~ 460 nm.
Firmware update by the user.
Dimensions: 180 mm high, 154 mm wide and 105 mm deep. Voltage range: 100 €“ 240 V AC.
BT91
105 or 106 Geobacillus stearothermophilus ATCC 7953 spores per vial. Positive growth results (failure in the sterilization process): culture medium turns to yellow, incubation at 60 ºC for 24 hours (maximum).
BT95
Rapid Readout Fluorescence System.
Final fluorescence reading is performed after 2-hour incubation at 60 ºC.
BT96
Super Rapid Readout Fluorescence System.
Final fluorescence reading is performed after 30-minute incubation at 60 ºC. 106 Geobacillus stearothermophilus ATCC 7953 spores per vial. An optional visual pH color change confirmation could be performed after 48 hours of incubation.
If sterilization process has not been successful, culture medium will change to yellow during incubation at 60 ºC, thus showing the presence of living spores. If sterilization process is successful culture medium will remain purple after the incubation process.
7-day readout is optional and not intended to be routinely performed; it is an initial validation of the 30-minute reading. Fluorescence results may be compared to the 7-day visual reading.
NOTE: If 7-day readout is performed, a humidified environment will be required to prevent medium from drying out. D-Value at 2 mg/l H2O2, 50 ºC.
Cintape® CT40
Type 1 Chemical Indicator.
Roll of self-adhesive tape printed with indicator ink.
Size: 50 m x 19 mm.
Initial color: purple
Final color: green
100 % Toxic Heavy Metals free.
Tape surface treated with covering materials that allow an easy and continuous writing. Adhesive capable of adhering to wrap cloth, paper and plastic. Designed with advanced technologies to ensure that the tape remains adhered to the surface after sterilization and leaves no trace of adhesive on the surface of the materials after removal.
Chemdye® CD40
Type 4 Chemical Indicator.
Strips printed with indicator ink.
Size: 105 x 18 mm
Initial color: Púrple
Final color: Green
100 % Toxic Heavy Metals free
Chemdye® CD42
Type 1 Chemical Indicator.
Varnished strips printed with indicator ink.
Size: 105 x 18 mm
Initial color: Red
Final color: Yellow
100 % Toxic Heavy Metals free.
Chemdye® CD47
Type 1 Chemical Indicator.
Self-adhesive label (dot) printed with indicator ink.
Size: 15 mm of diameter
Initial color: purple
Final color: green
100 % Toxic Heavy Metals free.

Related Products
It seems we can’t find what you’re looking for.