Chemdye® CD53 chemical indicator has been specially developed to control Formaldehyde sterilization processes. It consists of a double self-adhesive substrate of 29 x 22.5 mm printed with a highly sensitive innovative ink that turns from bordeaux-red to green when exposed to Formaldehyde. Its automated record system allows to control the cycle by identifying the load, the sterilization date and, eventually, the sterilizer (in case of having more than one).

Its self-adhesive properties offer the possibility of sticking it onto the load or any other material to be sterilized. Chemdye® CD53 chemical indicator has been specially designed to adhere onto non-woven wrappings, medical grade paper, polyester and polypropylene.

Chemdye® CD53 chemical indicators can be used either with or without Chemdye® CG3 Labeler. Using them with Chemdye® CG3 Labeler enables not only to speed-up the process of placing them onto the surfaces but to record important information related to the sterilization process.

Instructions for use

1. Peel off Chemdye® CD53 chemical indicator from the roll and stick it onto the package to be controlled.

2. Run a normal sterilization process.

3. Once the process has finished, open the sterilizer door, wait five minutes and remove the load. CAUTION: wear safety glasses and gloves  when removing the sterilized package.

4. Check the final color reached by Chemdye® CD53 chemical indicator. A green final color proves the chemical indicator has been exposed to Formaldehyde. IMPORTANT: this color change does not fully evidence the process effectiveness to achieve sterility. If the final color does not change, check the sterilization process.

The post Self-adhesive label indicator for LTSF first appeared on Terragene.

Control of Steam sterilization processes.

Conditions: 121 ºC, 10 minutes // 134 ºC, 2 minutes.

Characteristics

Type 1 Chemical Indicator.

Double adhesive labels printed with indicator ink for data registration.

Size: 70 x 35 mm.

Initial color: purple.

Final color: green.

100 % Toxic Heavy Metals free.

The post Self-adhesive label indicator for Steam first appeared on Terragene.

Chemdye® CD33 chemical indicator has been specially developed to control Dry Heat sterilization processes. It consists of a double self-adhesive substrate of 29 x 22.5 mm printed with a highly sensitive innovative ink that turns from blue to brown when exposed to Dry Heat. Its automated record system allows to control the cycle by identifying the load, the sterilization date and, eventually, the sterilizer (in case of having more than one).

Its self-adhesive properties offer the possibility of sticking it onto the load or any other material to be sterilized. Chemdye® CD33 chemical indicator has been specially designed to adhere onto non-woven wrappings, medical grade paper, polyester and polypropylene.

Chemdye® CD33 chemical indicators can be used either with or without Chemdye® CG3 Labeler. Using them with Chemdye® CG3 Labeler enables not only to speed-up the process of placing them onto the surfaces but to record important information related to the sterilization process.

Instructions for use

When using Chemdye® CD33 chemical indicator without Chemdye® CG3 Labeler

1. Peel off Chemdye® CD33 chemical indicator from the roll and stick it onto the package to be controlled.

2. Run a normal sterilization process.

3. Once the process has finished, open the sterilizer door, wait five minutes and remove the load. CAUTION: wear safety glasses and gloves when removing the sterilized package.

4. Check the final color reached by Chemdye® CD33 chemical indicator. A brown final color proves the chemical indicator has been exposed to Dry Heat. IMPORTANT: this color change does not fully evidence the process effectiveness to achieve sterility. If the final color does not change, check the sterilization process.

The post Self-adhesive label indicator for Dry Heat first appeared on Terragene.

Chemdye® CD13 chemical indicator has been specially developed to control Ethylene Oxide sterilization processes. It consists of a double self-adhesive substrate of 29 x 22.5 mm printed with a highly sensitive innovative ink that turns from light blue to green when exposed to Ethylene Oxide.

Its automated record system allows to control the cycle by identifying the load, the sterilization date and, eventually, the sterilizer (in case of having more than one). Its self-adhesive properties offer the possibility of sticking it onto the load or any other material to be sterilized. Chemdye® CD13 chemical indicator has been specially designed to adhere onto non-woven wrappings, medical grade paper, polyester and polypropylene.

Chemdye® CD13 chemical indicators can be used either with or without Chemdye® CG3 Labeler. Using them with Chemdye® CG3 Labeler enables not only to speed-up the process of placing them onto the surfaces but to record important information related to the sterilization process.

Instructions for use

1. Peel off Chemdye® CD13 chemical indicator from the roll and stick it onto the package to be controlled.

2. Run a normal sterilization process.

3. Once the process has finished, open the sterilizer door, wait five minutes and remove the load. CAUTION: wear safety glasses and gloves when removing the sterilized package.

4.Check the final color reached by Chemdye® CD13 chemical indicator. A green final color proves the chemical indicator has been exposed to Ethylene Oxide. IMPORTANT: this color change does not fully evidence the process effectiveness to achieve sterility. If the final color does not change, check the sterilization process.

The post Self-adhesive label indicator for automatic labeler for EtO first appeared on Terragene.