Characteristics

-2 ml clear glass vial: 31.0 mm high x 11.0 mm external diameter, 8.0 mm neck diameter. Wall thickness: 0.5 mm.

-Brown/Red rubber septum: 8.0 x 1.0 mm.

-Aluminum top cap: 5.5 mm high x 11.7 mm diameter.

-Wall thickness: 0.3 mm.

-Ceramic cylinders: 2.5 mm high and 2.5 mm diameter.

-Blue clear reactive solution: 1.5 ml.

-Allows detection of deficiencies in the cavitation performance of the ultrasonic washing machine. A self-adhesive Record Card accompanies each vial where data about the ultrasonic washing control process can be recorded.

-Challenge level: high.

-Initial Color: blue.

-Result: yellow transparent solution.

Instructions for use

Ultrasonic washers should be checked at least once per week and the results should be recorded. There are two types of tests (see figure) and CDWU-Z indicator can be used in both:

-Periodic functional test: for initial set-up of the washing machine, and at regular intervals of three months or after a repair. The purpose of this test is to verify the uniform distribution of the cavitation process in the washer tank.

-Test routine: is performed weekly or daily, to verify that the cavitation works correctly. This test allows detecting a possible failure in the performance of the ultrasonic washing machine.

The post Indicator for ultrasonic cavitation performance tests – CDWU-Z first appeared on Terragene.

Applicable Regulation

Designed under Quality Management System standards ISO 13485:2016/NS-EN ISO 13485:2016. ISO/TS 15883-5:2005.
Characteristics
Challenge level: high.
Allows detection of all factors affecting the outcome of cleaning process.
Initial Color: blue.
Size: 70 mm x 30 mm (approximate).
Synthetic temperature-stable support.
Result: elimination of blue organic substance.
To interpret results visually, use the results reference guide on product´s instructions for use. Optionally, the readout of the cleanning indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual).

NOTE: If unfavorable results are obtained, check quality/quantity of detergent, cleaning time and temperature, positioning of the load, cleaning indicator location and general condition of the washing machine.

The post Splat – Washing indicator for cleaning performance tests. first appeared on Terragene.

Designed for ultrasonic cleaning processes´ routine control and monitoring ultrasonic cavitation effectiveness of ultrasonic washing machines operating at frequencies equal to or greater than 35 kHz, at temperatures ranging from 18 °C to 70 °C.

Characteristics

-2 ml clear glass vial: 31.0 mm high x 11.6 mm external diameter, 8.0 mm neck diameter. Wall thickness: 0.5 mm.

-Brown/Red rubber septum: 8.0 x 1.0 mm.

-Aluminum top cap: 5.5 mm high x 11.7 mm diameter. Wall thickness: 0.3 mm.

-Glass beads: 3.0 mm.

-Blue clear reactive solution: 1.5 ml.

Allows detection of deficiencies in the cavitation performance of the

ultrasonic washing machine.

A self-adhesive Record Card accompanies each vial where data about the ultrasonic washing control process can be recorded.

-Challenge level: high

-Initial Color: blue

-Result: yellow transparent solution

Instructions for use

Ultrasonic washers should be checked at least once per week and the results should be recorded. There are two types of tests (see figure) and CDWU indicator can be used in both:

-Periodic functional test: for initial set-up of the washing machine, and at regular intervals of three months or after a repair. The purpose of this test is to verify the uniform distribution of the cavitation process in the washer tank.

-Test routine: is performed weekly or daily, to verify that the cavitation works correctly. This test allows detecting a possible failure in the performance of the ultrasonic washing machine

The post Indicator for ultrasonic cavitation performance tests. first appeared on Terragene.

Designed for routine control of cleaning processes and for monitoring automatic washing machines effectiveness as well as monitoring ultrasonic washing machines which operate at frequencies equal to or greater than 35 kHz, and temperatures between 30 ºC and 70 ºC.

Characteristics

-Challenge level: very high.

-Allows detection of all factors affecting the outcome of cleaning process.

-Initial Color: fuchsia.

-Size: 70 mm x 30 mm (approximate).

-Synthetic temperature-stable support.

-Result: elimination of fuchsia organic substance.

To interpret results visually, use the results reference guide on product´s instructions for use.

Optionally, the readout of the cleanning indicator can be done using Trazanto Automatic Quality Control and Traceability System (see instructions for use in device´s manual).

Instructions for use

1.Choose the Chemdye® Splat CDWA indicator according to the desired difficulty.

2.Place the indicator on the Chemdye® Splat CDWAH or Chemdye® Splat CDWAH-U holder.

3.Place the system on the tray along with the material.

4.Once the cleaning cycle is over, remove the indicator.

5.Analyze Chemdye® Splat CDWA indicators using the reference table and record results. If unfavorable results are obtained, perform the appropriate corrective actions and repeat the washing process.

The post Splat – Washing indicator first appeared on Terragene.